RMR-86 is Sodium hypochlorite-based, which can be hazardous without proper equipment and precautions. In addition, mold stain cleanup environments are already hazardous, and precautions should always be taken. On average a 32 oz bottle covers about 60 square feet and a 1 gallon covers about 200-400 square feet. This can vary based on the severity of the affected area, as well as how liberally the product is applied.

On average a 32 oz bottle covers about 125 square feet and a 1 gallon covers about 500 square feet. This can vary based on how liberally the product is applied. A direct spray is required for the RMR-86 to work properly. Using a trigger sprayer on the bottle for small jobs, or a pump-up sprayer or an electric sprayer for larger jobs. Using on a rag is also acceptable in some cases. Make sure you shake product vigorously prior to applying as well.

The best part? RMR - 86 doesn't require scrubbing! Ditch the wire brushes and constant reapplications. With the RMR - 86 stain remover, every mold and mildew cleanup job is one and done! The RMR-86 has a very strong chlorine like smell which is why the full-face respirator is required. Odor - Fighting Power: Say goodbye to gross, musky smells. RMR - 86 combats odors and leaves no trace of mold and mildew behind.

Absolutely, fogging will take care of mold spores in the air and get into hard to reach areas, but a direct spray will get you the best results. Impressive Stain - and Odor - Busting Power: Powerful stain - dissolving ingredients are no match for even the most challenging mold and mildew problems. RMR-86 is the most advanced mold stain and mildew stain remover on the market today. It has been specifically formulated and tested in the field for many years. Our active ingredients are far more of a premium quality then most others.

Documents

A direct spray or fogging will get you the best results. Using a trigger sprayer on the bottle for small jobs, or a pump-up sprayer or an electric sprayer for larger jobs, as well as a cold ULV fogger. Using on a rag is also acceptable when applying the RMR Botanical. The RMR-86 could potentially remove the sealant as well, so we recommend testing it on a small area first to see the results. If it does strip the sealant, you can reseal the wood after RMR-86 has dried. The RMR Odor-X Pro is formulated to leave no scent or fragrance behind only clean, crisp, fresh smelling air. There is a slight tracer scent in the product to help customers know where they have sprayed. The tracer scent disappears after a minute or two.