Which one’s speedier? According to the data we’ve gathered, it’s the Makita RT0701C, with an RPM rating of up to 30,000 RPM. In comparison, the DeWalt has up to 27,000 RPM. Weight You don't have permission to access "http://www.homedepot.com/p/DEWALT-7-Amp-Corded-1-1-4-Horsepower-Compact-Router-with-Plunge-Base-and-Bag-DWP611PK/203054747" on this server. Remove the two eccentric nuts holding the V-Wheels on the right side of the Z-Axis carriage (the two actually connect to the spindle mount). Now remove the two cap head screws that hold the mount to the ACME rod. You can now remove the mount. Finally, remove the other two V-Wheels.

That is where I can help. This article is my review of the very popular DEWALT DWP611PK router combination kit. With this model you do get a fixed base router, and also a plunge router. The DWP611 comes factory with a 1/4″ collet. This is likely too large for most CNC needs and most certainly will not work with any of your existing bits. You can either buy a 3rd party 1/8″ collet replacement, or you can do what I did and just buy a 1/4″ to 1/8″ bushing reducer ( AMANA RB-102). I wasn't happy with the edge guide that DeWalt makes for my DW618 routers, and the DNP611 one for the DWP611 is just a smaller version of it. I now have and use a CRB7 for all of my router jig needs when using my DWP611.

Shop-Vac brand universal tool adapter 90687 fits the dust collection attachment. It must be cut to fit. Use sections 2 and 3 as shown in attached pic to adapt to a 1-1/4” Shop-Vac hose.

The Dewalt DWP611 Compact Router makes niche wood cuts so much easier. The fixed base wiggles slightly The compression springs and wing screws are available through servicenet.dewalt.com. They do not come with the plunge base but make nice original equipment additions for adding shop made or aftermarket edge guides. Use two of each of the springs and screws in the plunge base and place the spring under the wing screw to hold tension to prevent it from loosening when not in use. The plunge base actually does include one of these wing screws for setting the depth guide only. It does not come with the spring under it, but the plunge base depth adjust on the larger DW618 router does have the spring so I also added a spring to my DWP611 plunge depth set wing screw as well. This same screw as described above is what fits the base for the edge guides (for both the DWP611 plunge, and the DW618 fixed and plunge bases). The DeWalt DWP611 wins again in this area. LED is important especially when working in a workspace with poor lighting. Depth Adjustment System That's a great list, and I'm certain that it's going to help a few of us find the accessories that we want.Does anyone happen to know if A: any other routers happen to be compatible with the diameter of the DeWalt DWP611, so that it would fit in this mount, or B: anywhere to buy different mounts for different routers? or C: any good place in the UK to buy a DeWalt DWP611. Any suggestions will be much appreciated :) Keep collections to yourself or inspire other shoppers! Keep in mind that anyone can view public collections - they may also appear in recommendations and other places. Well that all changes today as The Geek Pub’s X-Carve get’s an upgrade from the 24V DC spindle that was included in the original shipment, to the DeWalt 611 router. My X-Carve just went from neat to awesome! The DeWalt DW611 Router as an X-Carve Spindle