Teltonika RUT950 LTE 4G Router

Product Information

Fixed provider information and IMSI value representation when SIM and modem cannot provide this information

TELTONIKA NETWORKS декларира, че RUT950 е в съответствие със съществените изисквания и другитеприложими разпоредби на Директива 2014/53/EU WAN: 1 x WAN port (can be configured to LAN) 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

However, you may want to add a new user at first. This can be done from the Add New User section below:

An identification string (name) for the access point. It is how the access point will be seen by connecting devices.

Teltonika RUT950 4G LTE WLAN Router

You can perform a factory reset via command line by executing the firstboot command. After this you will be asked to confirm the reset. If you're sure, type the letter y and press "Enter" or type the letter n if you wish to cancel the reset. Draft EN 301 489-1 V2.2.0, Draft EN 301 489-17 V3.2.0, Draft EN 301 489-19 V2.1.0, Draft EN 301 489-52 V1.1.0 FCC 47 CFR Part 15B (2018), ANSI C63.4 (2014) Uniquely identifies the tunnel. The value used must match the peer tunnel ID value being used at the peer.

From the device top engraving/labeling, the previously relevant authentication information text will be removed: User/Pass: admin/admin01. Choose this option if you want to select certificate files from device. Certificate files can be generated in Certificates section.Turns SMS warning on or off. When turned on and configured, sends an SMS message to a specified number after the SIM card uses a specified amount of data.