The British Pipe Marking Standard requires that, at a minimum, pipe marking signs must be located on both sides of valves, service appliances, bulkheads, wall and floor penetrations, as well as any other place pipe contents identification is needed. These regulations are important to follow otherwise the marking will be invalid. In 2021, oil (kerosene) continues to be the most widely used fuel in off-grid homes. However, to reflect that a renewable liquid fuel, such as HVO may soon be available (see our future heating section) we have used the term liquid fuel in this guide to include both oil and low carbon liquid fuels. The purpose of the labelled pipe is indicated by pipe marking tape. It is required by law to label any pipes carrying hazardous materials with the substance name and the appropriate colour code. All pipeline identification tapes are made of 90 micron self-adhesive vinyl with a rubber-based adhesive and a clear polypropylene surface laminate. Our pipe tape has an operating temperature range of -10°Cto +50°C.

UK Tapes Ltd: UKT09OILX | WAVEYWIRE detection tape

A fire valve is an essential safety feature of a fuel supply installation, which will stop the supply of fuel in the event of a fire or an overheat situation occurring at the appliance. The valve should be located outside the building, before the point of entry, and be activated by a remote sensor. Existing fuel supply pipes that are not accessible outside of the building, and do not have a fire valve, can have one added at the first point where the pipe appears internally. This is not permitted on a new pipe installation, but it can improve the safety of an existing installation. Fire valves are also required for externally located appliances. Your OFTEC registered technician will be able to offer advice on the correct selection and positioning of fire valves. Annual inspection This has led OFTEC to join forces with colleagues across the heating industry to research a low carbon liquid fuel alternative to heating oil. The fuel, called HVO, can be used as a direct replacement and offers a near 90% reduction in emissions. Home guide to domestic liquid fuel storage up to 3500 litres Home guide to domestic fuel supply pipes There are additional colours that can be used for pipe markings, but as they are 'user defined,' no industry-wide standard is followed. However, despite having numerous locations, a corporation should adhere to a single standard.How would I know if I need to use pipe marking tapes?Pipe marking signs are an essential part of dealing with potential safety issues, pipes that are exposed specifically above ground are a risk that must be highlighted using marking tape. The meaning behind this is due to the safety of those working around the pipes to enable the pipes to be visible and therefore less dangerous. When it comes to industrial piping, workers need a way to accurately and consistently identify the hazards they may face. Furthermore, BS 1710 states that pipe labeling is required if the pipes are actively carrying fluids or gases. Whether you are already registered with OFTEC or simply want to find out a little more about what's involved with registering for OFTEC's Competent Persons, Microgeneration Certification, TrustMark or PAS 2030 schemes, you've come to the right place. entriforce Stokbord underground cable protection covers are heavy duty cable protection covers designed to withstand damage and protect HV cables from plant and hand tools - suitable for underground high voltage cable protection (22kV, 33kV, 66kV, 132kV and up to 400kV). Directly buried fuel supply pipes should be protected against the risk of accidental damage caused by digging. The recommended installation method is as follows: Material – Linear low density polyethylene Lead free pigments with virgin grade film Soil tolerance from pH 2.5 to pH 11.0 inclusive

domestic fuel supply pipes - OFTEC Home guide to domestic fuel supply pipes - OFTEC

Fuel supply pipes are a vital part of any liquid fuel-fired heating system and it is important that they are installed and maintained correctly to ensure system reliability and safety. Correct installation also helps to avoid the risk of leaks, which can cause pollution and are costly to clean up. This guide applies to pipes that carry fuel to liquid fuel-fired appliances of up to 70kW output which are located at properties used primarily for domestic purposes. Fuel supply pipesPipe marking is a vital part of reassuring the health and well being of workers around pipes carrying gases, liquids or other elements that could potentially cause harm. The color of the pipe marking is specific to the element the pipe is carrying, which informs workers of the danger. Domestic fuel supply pipes are usually made of plastic-coated soft copper tubing that can be easily manipulated.. Plastic pipe systems are also available but must only be used below ground and outside of buildings. Fittings and jointing materials must be suitable for the type of pipe and fuel being used. Liquid fuel supply systems What are the different pipe marking tapes available?Each pipe must be clearly identified using the correct pipe identification banding. Each tape is different depending on what is within the pipe, the most common are: