Joined in 2023 
82 
63 About this deal
Where metal nuts or wing nuts are used, depending on how old they are they might be very corroded and can be a nightmare to remove. If this is the case, soak them in WD40 or a similar easing fluid. Although most seats and fittings are adjustable so that they will fit the most common toilet bowl shapes, you still need to ensure it’s the right size. As there are many different types of adjustable top fixing hinges you will need to refer to the manufacturers instructions included with the kit on how to adjust correctly.
a Toilet Seat | DIY Doctor How to Fit or Replace a Toilet Seat | DIY Doctor
With the lid and ring flat to the top of the toilet pan and the hige and hinge plate in the same position, lower it down on to the pan, slotting the studs through the fixing holes. D-Shape: These seats tend to be modern so suit modern bathrooms and toilets and they are a little larger than more traditional toilets Pointed Nose: One of the most common types of toilet seat and used for more traditional toilets, they are comfortable to use but are slightly larger than rounded seats Make sure the fit is good and that the hinge plates are both pointing in the same direction and the seat is sitting evenly around the perimeter of the toilet bowl. Step 5 – Fit Washer and Nuts Finally, slip the vinyl or plastic washer over the stud and slide it up to the hinge plate. This sits between the hinge plate and pan and protects the pan from scratching. Step 2 – Adjust the HingesWhen replacing a toilet seat you have to be absolutely sure that you are replacing the old one with one of exactly the same size so that all supports on the base of the ring sit flat on top of the pan
toilet seat spares. Hinges. Bolts. Fittings Packs etc. WC toilet seat spares. Hinges. Bolts. Fittings Packs etc.
Fitting a new toilet seat is basically a reversal of the removal process. Make sure that the nuts are secure but not overly tight, as the plastic screws will not take a lot of punishment before they give way and strip the threads or snap. There are 3 main complaints that we hear about toilet seats, and generally they are easily dealt with (if your seat is of a reasonable quality): My Toilet Seat Slides, Wobbles or is Unsteady Altering the location of the fixing bolt in the hinge plate can move the position of the hinge forward Available in a vast range of different styles, wooden seats are both comfortable and warmer than plastic in the cold.What “wrap over” actually means is that the lid of the seat wraps over and covers the actual seat all the way down to the top of the pan. This not only gives a more modern and minimal look but also helps to keep things more hygienic. As plastic is a fairly tough, hardwearing and durable material they also last a good amount of time. One type of plastic toilet seat that deserves a special mention is the resin seat. This is due to the fact that they differ slightly in that resin is slightly tougher and harder wearing than standard plastic and, apart from a massive range of different colours and styles, they can also have images and objects inset into them. If you are thinking of changing your toilet from a close coupled to a low level toilet, take a look at the project we have on this, the old seat may not fit the new loo.
Ideal Standard Seat Hinges - My Toilet Spares Ideal Standard Seat Hinges - My Toilet Spares
Depending on what type of hinges you have will depend on how they are fixed. Some hinges have no adjustment and simply fix in one position and if this is the case for yours then simply position them over the fixing plugs, insert the screw down through the hinge and into the plug and then screw it up. These kits are even easier to fit as all you have to do is insert the fixing plugs into the pan, position the seat in place and ensure it’s uniform to the top of the pan and then insert the screws and screw them up and you’re finished. Tips for Fitting Non-Standard Toilet Seats For the purposes of this guide we are going to run through fitting a seat using bottom fixing bolts. Step 1 – Fit Studs to Hinge Plate As you would imagine, instead of a securing the seat in place from below using a nut on a bolt that runs through the pan, the fixings are screwed down from the top into the top of the pan in the same way you would screw a screw into a piece of wood.There are quite a few different shapes of toilet around today and many different types of toilet seat to match. There are 4 standard types of toilet seat currently available and these are pointed nose, rounded nose, D-shape and square and depending on the type and age of toilet you have will depend on the type of seat that’s used.
Great Deal 
New Comment