Hinge restrictor clips attach to your hinges and limit the door opening to 86 degrees. This will keep them from banging into anything, just like you want. We opted for the cabinet restraint wire kit because we felt that would be the easiest way to solve the problem.

Pre-drill a small hole in that spot. You do not need to go very deep. Be sure not to drill through the cabinet. This is just to get the screw started. We opted to go with the cabinet door restraints because I read that there are some issues with the hinge restrictor clips only being compatible with certain types of hinges. Our stainless steel cabinet door restraints are the superior choice compared to the plastic hinge restriction clips offered by others. Here’s why:Our restraints work with practically every type of hinge on the market. No more guessing if you have the right hinge. Chances are you do. You don’t want your cabinet doors to hit each other because it can damage the door or the knob and will also make a surprisingly loud noise. You can add either a hinge restrictor clip or cabinet door restraints to your cabinet doors to limit how wide they can open and prevent them from banging into each other. String your screw through the other end of the restraint and screw into place. Again, be sure not to tighten it 100 percent of the way.

Thread the screw onto the restraint and screw into your pre-drilled hole. Make sure not to screw it completely flush into the cabinet. The wire needs a little give to it. We also liked that the cabinet door restraints allow you to select the open angle of the cabinet. Whether you want it to open a little wider or less wide because of the layout of your kitchen, you can make that specific adjustment. Love them. They definitely stop the cupboard doors from hitting each other. Great little restrictor piece

Our cabinet door restraint kits are the perfect way to prevent damage to your home, boat, camper or RV. If you’ve installed cabinet restraint wires, you can change the angle by changing where the restraint is attached to the door or the cabinet. The wire remains the same length, so changing where it attaches will change how much the door can open. The plastic restriction clips get brittle and break easily. After all, they’re only made of plastic.

Doors should be able to stop at a perfect 90 degree angle and if they don’t you can fix it yourself. Hinge restrictor clips attach to the actual hinges of your cabinet door and keep them from opening all the way, but you have to know exactly what type of hinge you have and if it’s compatible with the clips.Are you wondering how to keep your cabinet doors from swinging open too far? Are your cabinet doors hitting a wall? Are your cabinet doors hitting an appliance? Are your cabinet doors hitting a pendant light? Are your cabinet doors hitting another cabinet? If you answered yes to any of those questions, we have the perfect, simple solution for you. Here’s how to prevent a cabinet door from hitting the wall by adding a simple wire. Options for keeping a cabinet door from opening too far Note – ensure that your screw is shorter than the depth of your cabinet. Too long of a screw will poke out the front! Video tutorial The plastic restriction clips put all of the stress and strain of limiting your door opening angle on the hinges themselves – something they are not designed to handle. This will cause premature failure of your cabinet hinges and possible damage to your cabinetry. Titus hinge angle restrictors limit the opening angle of cabinet doors and prevent damage to door or any adjacent object.

The plastic restriction clips have only one opening angle: 86 degrees. That “one size fits all” approach may work great for the company making them, but not for the end consumer. Great invention. Small and not the best instructions. Would be nice if the cabinets just came with them!!Decide where you want the other end to go on the cabinet to hold the door to your preferred angle. Mark with pencil. Pre-drill in this spot.