No need for naked flames or melted bitumen thanks to the super strong adhesive on the underside of this sheet With a two-layer system, Easyseal systems are ideal for smaller roofing applications, including porches, garages, extensions and dormer windows. They are also usable on larger-scale applications due to the easy no-fire installations as per IKO's 'Step by Step' fixing instructions. Before using this product, it is recommended to use A/C EasyDry if moisture is present in the system. Surfaces must be clean with no visible stains, dirt, debris, algae, moss, mould, fungal growths, waxes or coatings – as well as being free of previously applied finishes otherwise there is a risk they will be permanently sealed in after application. Floor Levellers & Preparation We offer a range of single & two-part flexible, reinforced and deep fill floor levellers, bulking concrete, primers and vapour suppressants for preparation of your subfloor prior to tiling or laying floor coverings.

This product is not suitable if surfaces have been treated previously with a silicon or stearate based water repellent EASYSeal BCS can be applied to a variety of concrete paving materials on driveways, paths, walkways and patios. Features & Benefits The self-adhesive properties eliminate the need for gas torches and hot works, hot bitumen, and any other messy sealants that CAN make installations irritable and time-consuming. External wall cladding requires protection from the weather and pollution and we can offer a range of coating systems which will protect most surfaces from plastic-coated metal cladding to Asbestos wall cladding sheeting. Apply two coats, if using a brush or roller, apply the second coat by brushing or rolling at right-angles to the previous coat at a rate of 4 – 6m2 per litre. Apply the second coat between 3 and 24 hours after the first coat is touch dry

Please note: Natural stone varies in levels of porosity, therefore on more porous stone or uneven surfaces the coverage will be less and more product will be required. For less porous stone, such as slate and limestone use our EASYSeal Slate and Limestone sealer and enhancer. EASYSeal Sandstone Sealer & Enhancer is for more porous natural stone. The EasySeal line has proven to be the number one trusted leak sealant brand for years, with millions of leaks sealed. Now Nu-Calgon has made EasySeal even better with EASYSEAL ULTIMATE – the strongest and fastest leak sealant on the market, now with the ability to treat systems up to 10 tons in one application! Surfaces should be clean, dry and free from mould, debris, algae and efflorescence before applying to the sandstone

Paving, Pointing & Grouting We offer a range of pointing and grouting materials for jointing your patio slabs, outdoor paving or driveway including flowable slurry grouts such as UltraScape Flowpoint, brush-in grouts like EasyJoint and gun injected mortar for fine pointing. As well as supplying paving primer, sealants and paving and driveway cleaners.Incredibly easy to apply to your roof, the installation process can be carried out by DIY enthusiasts and professional builders alike EASYSeal BCS is ideally applied to a dry surface but can be used on lightly damp – not wet or soaked surfaces, must be free from standing or ponded water Tarmac & Pothole Repair We offer a range of permanent pothole repair & pothole filler materials such as Ultracrete Permanent Pothole Repair, instant tarmac including Ultracrete Instant Road Repair 6 & 10mm, cold joint sealants, line marker paints and anti-skid patch repair. You're able to select a preferreddelivery date in your shopping basket. Whilst we aim to deliver your items on this date, it is not guaranteed.

A/C EasySeal is designed to prevent as well as repair leaks anywhere in the system, including condensers, evaporators, copper lines, and soldered joints. It is easily injected into the system, traveling with the refrigerant, searching for leaks. The fact that A/C EasySeal travels with the refrigerant is very important to its ability to find leaks faster, using less sealant than those sealants designed to mix and travel with the systems oil. NOTE: You may also use a refrigerant cylinder to push sealant into system while charging if the system is low on refrigerant. Just connect EasySeal Ultimate to service port and inject refrigerant through injector into system while charging.metres of control layer means you’ll be able to cover plenty of area on your roof with just one roll