Clean and simple installation, low pressure injection ensures correct dosage and less chance of spillage Remove skirtings, fixings and render / plaster to expose the line of the proposed DPC (mortar bed). Internal plaster affected by hydroscopic salts is removed from the area to be treated to a height of 300mm above the maximum level of the Rising Damp. These ground salts are hygroscopic and naturally absorb and hold moisture causing the walls to become highly saturated, contaminating plaster, and causing the skirting boards to decay and rot as they are against damp walls. Replastering After Installing No Hydro Damp Proof Course Injecting a damp proof course when there is a bridging of cavity walls. This will over time fill up with debris and can bridge the damp course, the moisture will pass through and cause damage.

Most modern properties are built with a damp-proof course. Some properties, however, were built with no damp proof course, or the original DPC has failed, meaning that rising damp occurs and it is necessary to make remedial repairs. Older pressure injection techniques for treating rising damp are time consuming, complicated and expensive. Dryzone Damp-Proofing Cream is the fast, clean and effective method of rising damp treatment. What Dryzone Does Eliminates the need to introduce large volumes of liquid carrier into the wall. Dryzone is over four times stronger than many competing products. At Timberwise, we have seen past work from local tradesmen, without the right damp proofing training, that have made common mistakes that have led to property owners having worse damp problems than they originally had before.

It is useful when calculating the cost of damp proofing your home to consider the following factors:

Fully insert the nozzle into each pre existing holes drilled , and then inject No Hydro Damp Proofing Cream while withdrawing it at a steady rate. Stop injecting just before removing from the area being repaired. On external faces of walls, drill holes can be re-pointed using a matched mortar or can be plugged with DPC Injection Plugs (Available in a variety of colours). It is the highest strength damp proofing cream in the world with an active ingredient (silane) level of 80%. This is more than any other damp proofing cream on the market providing long lasting protection against rising damp and giving the homeowner peace of mind. The product is then left to revert to its liquid phase and penetrate the masonry surrounding the hole. It is therefore essential to follow specific re-plastering guidelines drawn up for dealing with the particular challenges posed by damp / salt-affected surfaces.This is set by Hotjar to identify a new user’s first session. It stores a true/false value, indicating whether this was the first time Hotjar saw this user. It is used by Recording filters to identify new user sessions. There are some unusual cases where the moisture is higher than a metre which means the technician will remove the plaster 300mm above the highest point where the damp or hydroscopic salts can be seen.