Joined in 2023 
82 
63 About this deal
To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. The “echo” results in “-bash: /sys/devices/system/cpu/cpufreq/policy0/scaling_governor: No such file or directory” and trying to mkdir policy0 in “mkdir: cannot create directory ‘policy0’: Operation not permitted”.
I don't really have anything good to add in terms of actual help but, I've been using a RockPro64 with FreeBSD as my router for about a year now. But there are threads in the forum about which second-hand x86 devoces/appliances make decent routers should you want to switch to x86. NanoPi R4S is a high-end Friendly Elec mini-router with edge-computing and dual Gbps Ethernet ports. com using the pseudonym tkaiser because while being a bit harsh and offending sometimes he is a brilliant mind and has very deep knowledge about low to lowest level software support of SBCs.You can switch your provider and router at any moment and don’t care if your router supports the services you need. I intended to test thermally performance, Ethernet, and USB like I did for NanoPi R2S and NanoPi NEO3, but Armbian is not available right now, so I could not use some of the tools I normally used right now. On mine, I had to enable both "enable root login" and "enable password login" on the GUI to be able to log in.
sd-fuse" is a collection of scripts that can be used to create bootable SD card images for FriendlyElec boards. You may need to prise it out gently from the USB ports side if the heatsink pad sticks the board to the case. You can control packet size either with iperf’s ‘-M’ option (to set MSS), or by setting MTU at interface level for iperf client and server (https://www. If ifconfig -a sees wlan0, but the hotspot is not working properly, try changing the channel and country code, an inappropriate country code can also cause the WiFi to not work.Please let me know if anyone knows when this board gets working (or is already working) with opnsense or pfsense. An ethernet repeater with firewall functionality: the topology is limited with only 1 output port and why use such a powerful multimedia chip for this?
Flashing via Luci (explained below), gives the option to generate a list of installed applications for easy reinstall. It may be true for OPNsense-based (FreeBSD kernel), but the linux-based OpenWRT works at ~940mbps bidirectionally without breaking a sweat. Sure enough the lights came on and OpenWrt is running – I checked with “Advanced IP Scanner on my PC and when I found the board I checked it in a browser – 192. based image over on PersonalBSD I may try just to see if it's any better, but setting everything up over and over gets tedious.After the compilation is successfully completed, the OTA update related packages are located in the directory: rockdev/otapackage/ ，Please do not delete this directory. This can be fixed by making ctrl+c as default in uboot to make it only enter cli when these key combination of met.
The Nanopi-R2S also has the same issue, as you can’t connect the UART console while the case is closed. At this point I could start boring you with benchmarks and other numbers that under the bottom line telling nothing about real world application.IMPORTANT AND REMIND not include SD card , you need an SD card to install OS and you also need power by 5V/3A . I can see the power LED (red) is on, and the status LED (green) is blinking, but the LAN and WAN LEDs are off. The WAN interface is getting an IP from the DHCP router which is also connected on the GbE switch and the Nanopi-RxS runs it’s own DHCP server for the bridge interface which is the range of 192. Also I have a manageable switch in which I want to setup separated vlans + firewall rules (separated guest wifi, children controlled wan accès + specific dns, home automation critical subnet, dmz….
Great Deal 
New Comment