In terms of print quality, the lack of stiffness and the high distance between the extruder and nozzle are the biggest causes of problems with the Flsun QQ-S Pro. Thus, the energy consumption measurement shows that the mainboard, motors and heating element of the hotend require about 55 watts in operation, and the heating element of the print bed requires another 220 watts. Lattice bed - 255X 360 mm Large build size - Providing a strong adhesion during the print and to be easily taken off, once the print is completed and the bed is cooled.

With a maximum temperature of 270° C, QQ-S PRO can handle most common printing filaments, such as ABS PLA, PVA and wood. The QQ can run at speeds of up to 300mm/second and has been voted as the fastest 3d printer available in 2021, for under 500 USD. PrinterMods is a proud cog in that machine - supplying the maker community with what they need to grow and thrive.Featuring fast print speeds and due to its bigger size at 255 × 365 mm, perfect if you're wanting faster, larger prints without sacrificing quality.

Additionally, it is taller than most printers, it being specified at 360mm (most have over 370mm clearance). feet) high when assembled, it is recommended to place the printer on a low table from the beginning, depending on your height.Nevertheless, for the computing hardware in 3D printers, the equations of motion are not easy to solve, because several square roots must be drawn for each motion. If you have the power button on the front left of the screen, you have a QQ (8-bit) unit, which is different firmware. Marlin and MKS firmware also appear to be preconfigured with different values for acceleration and jerk. In contrast to conventional printers, the limit switches of a Delta printer are located at the top of the frame. The good news here, however, is that the printer does at least detect defects or shorted sensor cables.

The printer handled the intricate FLSUN indents perfectly, as well as the elephant’s eye, and without any stringing.Since only a small mass has to be moved, the stepper motors can be controlled with high acceleration values. Stuff like setting up printer radius only allows for 105mm etc but when I translate what I need for the duet from the mks robin it exceeds those size restrictions.